MODULE CAGE RACK MOUNT POWER SUPPLIES
BLANK PANELS
Model RP- 1 (typically loaded)

 

  • HEAVY DUTY MULTIPLE REGULATED VOLTAGES

  • EASILY Reconfigured MODULES

  • ACCOMMODATES YOUR CUSTOM BOXES AND CIRCUITS

Description:
RP-1: Rack mounted module cage that fits in a standard 19 inch rack. It accepts either 2.8 inch or 5.6 inch wide modules in any combination which does not exceed 14 inches. A power supply with a 2.8 inch front panel is attached to the far left side of the rack. The power supply drives a power bus on the rear of the rack providing four voltages plus ground to card edge connectors which are properly spaced to accept any combination of module sizes. Also, blank modules are available for the purpose of breadboarding special circuits in a module that can be powered by the Model RP- 1. The blank module is anodized and compatible in appearance to the rest of the system.
RP-1M: Rack mounted module cage without power supplies, accommodates 6 unit modules instead of 5.
RP-1R: Module cage with rear power switch and jacks, accommodates 6 unit modules instead of 5.
BP-1: Blank panel 2.8" wide, blue anodized with thumb screw, fits empty space.
BM-1: Plug-in module with panel as above, 2.8" wide, inserts into empty space.
BM-1C: Plug-in module with panel as above, 2.8" wide, equipped with premounted blank printed circuit card with edge connector pads for receiving power from RP- 1 supplies


Specifications:
Rack  
Overall Width . . . . . . . . . . . . . . . . . . . 19"
Front Panel Opening Width . . . . . . . 16.8"
Height . . . . . . . . . . . . . . . . . . . . . . . . . 5.25"
Overall Depth . . . . . . . . . . . . . . . . . . . 14.5"
Capacity . . . . . . . . . . . . . . . . . . . . . . . 5 unit modules (2.8" each)
Blank Module  
Width . . . . . . . . . . . . . . . . . . . . . . . . . 2.8"
Height . . . . . . . . . . . . . . . . . . . . . . . . . 5.25"
Depth . . . . . . . . . . . . . . . . . . . . . . . . . 7.25"
Power Supply  
Front Panel Width . . . . . . . . . . . . . . . 2.8"
Supply Voltages . . . . . . . . . . . . . . . . ±5V @ ±1000mA
±15V @ ±500mA
Line Regulation . . . . . . . . . . . . . . . . . 0.01 %
Load Regulation . . . . . . . . . . . . . . . . 0.1 %
Short Circuit Protection . . . . . . . . . . . Continuous
Input Voltage . . . . . . . . . . . . . . . . . . . 105 to 125 VAC (220 VAC available)
Frequency . . . . . . . . . . . . . . . . . . . . . 50 to 440 Hz

 


Systems, Amplifiers, Signal Analysis & Conditioning Instruments, Pulse Generators & System Isolators, Power Supplies,Primate Handling Equipment, Electrode Manufacturing & Test Equipment

Contact us at: P.O. 623, Mount Airy, MD 21771
Phone: (301)607-8300 or (800)894-6000
Fax: (301)607-9018
E-mail: info@bakelectronicsinc.com
BAK ELECTRONICS, INC.
Biomedical Instrumentation
[Home]